Alto TS310 10" 2-Way 2000W Powered Active DJ PA Loud Speakers w Stands Package

Description

Powered by
Frooition
My Store
About us
FAQ
Policies
Save Seller
Alto TS310 10" 2-Way 2000W Powered Active DJ PA Loud Speakers w Stands Package
Alto TS310 10" 2-Way 2000W Powered Active DJ PA Loud Speakers w Stands Package
Item Description
The new Alto Professional Truesonic TS3 Series does everything you demand in a no-compromise family of professional loudspeakers. These speakers solve every performance and installation challenge you have. They are high-performance in every sense: Their new transducers and amplifiers enable them to play extremely loud and clear, without compromise or restriction. And they are "high-performance" from a concept and manufacturing standpoint - Alto made sure that every aspect of their design outperformed what it had to do. The end result are loudspeakers that achieve a level of excellence and refinement that defies expectations. Defies your expectations. There are four models in the new TS3 range: The TS308, TS310, TS312 and TS315, with 8-10-12- and 15-inch woofers respectively. The range shares a new 2000-watt peak (1000-watt continuous) amplifier, a significant advance over the 1100-watt peak (550-watt continuous) amplifiers in the TS2.
The four models boast all-new low-frequency drivers, designed to play louder and handle more power than their already impressive predecessors, the wildly-successful TS2 Series. They also have a new horn-loaded high-frequency driver. This impressive transducer has a brand-new heat sink design that provides exceptional heat dissipation for impressive power-handling, even at all-night-long concert levels. Because these new drivers can safely handle the additional power, the TS3's take full advantage of the increased wattage and will play at higher SPLs with lower distortion. Alto Professional has even made the TS3's easier to use, with an updated control panel and clearer control indications and detents that make for a faster, more precise setup. 2000 watts of bi-amplified power, newly-designed drivers and easier, more satisfying controls and setup-the new TS3 range doesn't merely meet your requirements. It makes you re-think what's possible.
Alto TS310 10" Powered Loudspeaker Features:
2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF.)
10-inch (254 mm) LF driver, 2.5-inch (65 mm) high-temperature voice coil.
HF Driver: 1.4-inch (35 mm) neodymium magnet HF driver with precision waveguide.
High quality, lightweight, cabinet design for easy transport, set up and installation.
Pole-mountable, wedge monitor, bracket installation or flown application with integral M0 suspension points.
Integrated 2-channel mixer with dual XLR 1/4-inch combo mic/line inputs, independent level controls, XLR Link output, Contour EQ switch and Ground-Lift switch.
Custom-engineered high-efficiency class D amplifiers with passive cooling design - no fan means the speaker runs cleaner, quieter and has greater long-term reliability.
Designed and tuned in the USA.
What's Included
This Package Includes:
(2) Alto Professional TS310 2000 Watt 10" 2-Way Powered Loudspeakers
(2) Clutch CL-STPACK Tripod Speaker Stands
(2) 20FT Sure-Fit XLR Connecting Cables
(5) 8" Reusable Hook and Loop Cable Ties
Each TS310 Retail Box Includes:
(1) Alto Professional TS310 2000 Watt 10" 2-Way Powered Loudspeaker
(1) Power Cable
(1) User Guide
(1) Safety & Warranty Manual
Specifications
Alto Professional TS310 Specifications:
Output Power:
2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF)
LF Driver:
10-inch (254 mm) LF driver, 2.5-inch (65 mm) high-temperature voice coil
HF Driver:
1.4-inch (35 mm) neodymium magnet HF driver with precision waveguide
Crossover:
2.5 kHz
Maximum SPL:
129 dB peak, 126 dB continuous (dB SPL @ 1 m)
Frequency Response:
54 - 20 kHz (+/- 3 dB)
Frequency Range:
48 Hz - 22 kHz (-10 dB)
Horn Coverage:
90° H x 60° V nominal
Equalization:
Contour Switch Low and High Frequency +3dB Boost
Connectors:
(2) XLR/TRS 1/4" (6.35 mm) combo inputs, (1) XLR link output, (1) IEC power cable input
Controls:
(2) Volume, Power on/off switch, Contour switch, Ground-Lift switch
Indicators:
2 x Power LED (front and rear), Clip limiter LED
Protection:
Electronic clip, Thermal and transducer overdrive protection
Power Connection:
IEC with Mains Fuse
AC Voltage Input:
100,110-120,220–240 V, 50/60 Hz
Enclosure:
Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille
Mounting/Installation:
36 mm standard pole mount, Wall or celling mount using TSB810 bracket, Flown application with integral M10 suspension points, Wedge monitor
Dimensions: (H x W x D):
20.6" x 12.6" x 11.8" / 524mm x 320mm x 300mm
Net Weight:
26.1 lbs. / 11.9 kg.
Design Origin:
Designed and tuned in the USA
Accessories:
TSB810 Bracket, TS210 Cover
Two Retail Locations • One Massive Warehouse • Thousands of Items in Stock • Fast Free U.S. Shipping • Authorized Dealer for All Our Brands • Industry-Leading Support & Service • Dedicated, Reliable Staff •
Best Price. Period.
More Items!
View more great items
Odyssey Flight Ready Universal Glide Style Small DJ Controller Case
&dollar169.99
Odyssey Flight Ready Universal Glide Style Large Dj Controller Case
&dollar183.99
Gator Cases GPA-CVR8 GPA Series 8" Padded Nylon Speaker Cover
&dollar27.49
Gator Cases GPA-CVR12 GPA Series 12" Padded Nylon Speaker Cover
&dollar49.49
© 2017 I DJ NOW. All Rights Reserved. Any use of this material including all content, images and design, without prior written consent from IDJNOW, is strictly prohibited by law.
Powered by
Frooition
Frooition Frooition | No-js Template | eBay design, eBay store design, eBay shop design, eBay template design, eBay listing design (ver:froo_no_js)
This listing is currently undergoing maintenance, we apologise for any inconvenience caused.